Technical information
The BEEP base 390mm wide and 480mm long. Any hive with a maximum width of 480mm can be placed directly on top of the BEEP base. Regular size hives fit perfe...
Fri, 9 Apr, 2021 at 2:03 PM
The BEEP base works on two 1.5V AAA batteries of any type. We recommend the Energizer L92 Lithium AAA. The internal power converter will convert the battery...
Fri, 9 Apr, 2021 at 2:35 PM
The BEEP base is able to cope with high humidity. We have tested it under different humidity and temperature conditions. The stainless steel frame and alumi...
Tue, 27 Apr, 2021 at 9:17 AM
It is possible to add extra sensors to the BEEP base: the base supports a total of 9 temperature sensors (model DS18b20, or any compatible I2C-sensor) and 1...
Tue, 22 Nov, 2022 at 10:11 AM
You can use the BEEP PCB in combination with another scale. If you want to build your own measurement system take a look at hiveeyes and beelogger for infor...
Mon, 12 Oct, 2020 at 12:28 PM
The BEEP base comes with a magnet to turn it on/off and activatie Bluetooth. See image for the correct position of the magnet. Turn on - hold the magnet...
Fri, 9 Apr, 2021 at 2:31 PM
In the BEEP app you see weather data. This data is collected from satellites and is linked to the location of you apiary. It is also possible to connect you...
Wed, 11 Jan, 2023 at 11:07 AM
If you need an extra or spare sensor you can buy them separately online or in a technical store. On the overview below you can see the different sensor type...
Mon, 12 Oct, 2020 at 12:29 PM
If your BEEP base is running firmware version 1.5.9 or higher, you can read out the measurement data that is logged offline in the onboard memory by using t...
Fri, 15 Nov, 2024 at 2:13 PM
Connecting an alternative antenna: The BEEP base uses a patch antenna for the 868MHz lorawan connection. This antenna is glued to the inside of the PCB...
Wed, 6 Apr, 2022 at 1:09 PM