Maintenance
The BEEP base can function more than a year on lithium batteries, be sure to keep voltage above 2.5V (check in the BEEP app > Devices). Tip: To make...
Wed, 14 Apr, 2021 at 10:51 AM
In order to have correct weight measurements, perform a weight calibration procedure at least every year. You can quickly check the current calibration by t...
Wed, 14 Apr, 2021 at 3:10 PM
BEEP base firmware 1.5.9 and higher offers full log reading functionality (for both Android and iOS) and the possibility to switch off the tilt sensor...
Wed, 15 Feb, 2023 at 9:41 AM
We continue to work on updating the firmware from the BEEP base. Follow the steps below to update your firmware. Step 1: open your BEEP base app...
Wed, 14 Apr, 2021 at 4:20 PM
The BEEP base is a wirelessly connected device that sends it data over a LoRa network. All devices transferring data wirelessly depend on the availability a...
Thu, 22 Apr, 2021 at 9:46 AM
When you do your first hive inspection of the year it is important to replace the batteries, read the memory and perform a fresh weight calibration. This en...
Wed, 22 Feb, 2023 at 2:07 PM