The BEEP base runs on firmware. In this article, we list the firmware versions of the BEEP base and the corresponding download urls.
Version | 1.5.12 |
Release date | 16 September 2022 |
| Description | BEEP base 1.5.12 adds a fix for the timing between lora network connection attempts, fixing excessive battery drain when the lora network is unavailable. It also contains a fix for updating the BEEP base firmware by older Android phones. |
| Download url | https://assets.beep.nl/firmware/basev3/1.5.12/Beepbase_sd_boot_app.zip |
Version | 1.5.11 |
Release date | 10 February 2022 |
| Description | Improvements for BEEP base 3.3, backward compatible. |
| Download url | https://assets.beep.nl/firmware/basev3/1.5.11/Beepbase_sd_boot_app.zip |
Version | 1.5.9 |
Release date | 9 March 2021 |
| Description | BEEP base 1.5.9 offers stabilized full log reading functionality (for both Android and iOS) and the ability to disable the tilt sensor and power the BEEP base with the magnet: on (3s) / off (10s). It also adds correct time based logging in its flash memory, and sends its time via LoRa at each restart. This is an update for firmware 1.4.2 or higher. |
| Download url | https://assets.beep.nl/firmware/basev3/1.5.9/Beepbase_sd_boot_app.zip |
| Version | 1.4.2 |
Release date | 5 June 2020 |
| Description | BEEP base 1.4.2 adds a fix for stability of LoRa messages sent over KPN LoRaWAN. You should replace 1.4.1 with 1.4.2. |
| Download url | https://assets.beep.nl/firmware/basev3/1.4.2/Beepbase_sd_boot_app.zip |
| Version | 1.4.0 |
Release date | 19 May 2020 |
| Description | BEEP base 1.4.0 adds the ability to switch off the tilt sensor. |
| Download url | https://assets.beep.nl/firmware/basev3/1.4.0/Beepbase_app.zip |
| Version | 1.3.5 |
| Release date | 27 February 2020 |
| Description | BEEP base 1.3.5 adds a tilt switch stabilization timer. |
| Download url | https://assets.beep.nl/firmware/basev3/1.3.5/Beepbase_sd_boot_app.zip |
| Version | 1.3.4 |
| Release date | 27 February 2020 |
| Description | BEEP base 1.3.4 adds improvements for LoRA. |
| Download url | https://assets.beep.nl/firmware/basev3/1.3.4/Beepbase_app.zip |
| Version | 1.3.3 |
| Release date | 27 February 2020 |
| Description | BEEP base 1.3.3 adds energy improvements: The default measurement interval is now 15 minutes instead of 1 minute. Of course this can still be overriden. If you have already configured your BEEP base with a different measurement interval, it will not be overwritten. |
| Download url | https://assets.beep.nl/firmware/basev3/1.3.3/Beepbase_app.zip |