The BEEP base runs on firmware. In this article, we list the firmware versions of the BEEP base and the corresponding download urls. 


Version
1.5.9

Release date

9 March 2021
Description
BEEP base 1.5.9 offers stabilized full log reading functionality (for both Android and iOS) and the ability to disable the tilt sensor and power the BEEP base with the magnet: on (3s) / off (10s). It also adds correct time based logging in its flash memory, and sends its time via LoRa at each restart. This is an update for firmware 1.4.2 or higher.
Download url

https://assets.beep.nl/firmware/basev3/1.5.9/Beepbase_sd_boot_app.zip 


Version
1.4.2

Release date

5 June 2020
Description
BEEP base 1.4.2 adds a fix for stability of LoRa messages sent over KPN LoRaWAN. You should replace 1.4.1 with 1.4.2.
Download url
https://assets.beep.nl/firmware/basev3/1.4.2/Beepbase_sd_boot_app.zip


Version
1.4.0

Release date

19 May 2020
DescriptionBEEP base 1.4.0 adds the ability to switch off the tilt sensor.
Download urlhttps://assets.beep.nl/firmware/basev3/1.4.0/Beepbase_app.zip


Version
1.3.5
Release date27 February 2020
DescriptionBEEP base 1.3.5 adds a tilt switch stabilization timer.
Download urlhttps://assets.beep.nl/firmware/basev3/1.3.5/Beepbase_sd_boot_app.zip


Version1.3.4
Release date27 February 2020
DescriptionBEEP base 1.3.4 adds improvements for LoRA.
Download urlhttps://assets.beep.nl/firmware/basev3/1.3.4/Beepbase_app.zip


Version1.3.3
Release date
27 February 2020
DescriptionBEEP base 1.3.3 adds energy improvements: The default measurement interval is now 15 minutes instead of 1 minute. Of course this can still be overriden. If you have already configured your BEEP base with a different measurement interval, it will not be overwritten.
Download url
https://assets.beep.nl/firmware/basev3/1.3.3/Beepbase_app.zip